#include <ModbusMaster.h> ModbusMaster pzem; void setup() Serial2.begin(9600); // RS485 connected to Serial2 pzem.begin(1, Serial2); // Slave ID 1
Below is the complete breakdown of where to download the software, required drivers, and alternative programs. The most common software for the PZEM-017 is the Modbus Poll simulator or the basic serial reader provided by some resellers. However, Peacefair does not offer a proprietary "PZEM-017 Studio." Instead, you use generic Modbus software.
There is no single "PZEM-017 software" file. The device uses the industry-standard Modbus RTU protocol , so any Modbus master software will work once the correct COM port and slave ID are configured.
This LMC simulator is based on the Little Man Computer (LMC) model of a computer, created by Dr. Stuart Madnick in 1965. LMC is generally used for educational purposes as it models a simple Von Neumann architecture computer which has all of the basic features of a modern computer. It is programmed using assembly code. You can find out more about this model on this wikipedia page.
You can read more about this LMC simulator on 101Computing.net.
Note that in the following table “xx” refers to a memory address (aka mailbox) in the RAM. The online LMC simulator has 100 different mailboxes in the RAM ranging from 00 to 99.
| Mnemonic | Name | Description | Op Code |
| INP | INPUT | Retrieve user input and stores it in the accumulator. | 901 |
| OUT | OUTPUT | Output the value stored in the accumulator. | 902 |
| LDA | LOAD | Load the Accumulator with the contents of the memory address given. | 5xx |
| STA | STORE | Store the value in the Accumulator in the memory address given. | 3xx |
| ADD | ADD | Add the contents of the memory address to the Accumulator | 1xx |
| SUB | SUBTRACT | Subtract the contents of the memory address from the Accumulator | 2xx |
| BRP | BRANCH IF POSITIVE | Branch/Jump to the address given if the Accumulator is zero or positive. | 8xx |
| BRZ | BRANCH IF ZERO | Branch/Jump to the address given if the Accumulator is zero. | 7xx |
| BRA | BRANCH ALWAYS | Branch/Jump to the address given. | 6xx |
| HLT | HALT | Stop the code | 000 |
| DAT | DATA LOCATION | Used to associate a label to a free memory address. An optional value can also be used to be stored at the memory address. |