Jis H 5114 Pdf Today

Zinc alloys are widely used in die casting due to their excellent fluidity, high dimensional accuracy, good mechanical strength, and relatively low melting point, which extends die life. JIS H 5114 primarily covers two major grades of zinc alloys for die casting, often referenced as:

| Element | ZDC1 (wt%) | ZDC2 (wt%) | |---------|------------|------------| | Aluminum (Al) | 3.5 – 4.3 | 3.5 – 4.3 | | Copper (Cu) | ≤ 0.25 | 0.75 – 1.25 | | Magnesium (Mg) | 0.03 – 0.06 | 0.03 – 0.06 | | Iron (Fe) | ≤ 0.10 | ≤ 0.10 | | Lead (Pb) | ≤ 0.004 | ≤ 0.004 | | Cadmium (Cd) | ≤ 0.003 | ≤ 0.003 | | Tin (Sn) | ≤ 0.0015 | ≤ 0.0015 | | Zinc (Zn) | Remainder | Remainder | The standard specifies minimum mechanical properties for separately cast test specimens (not taken from the casting itself, unless agreed upon): jis h 5114 pdf

| Grade (Symbol) | Comparable UNS / ASTM | Key Characteristics | |----------------|------------------------|----------------------| | | UNS Z33520 (Alloy 3) | General-purpose, good ductility, excellent finishing characteristics | | ZDC2 | UNS Z35530 (Alloy 5) | Higher strength and hardness than ZDC1, good wear resistance | Note: Older versions of the standard may have included ZDC3 (Alloy 2) but modern revisions focus on ZDC1 and ZDC2 due to better long-term dimensional stability. 3. Chemical Composition Requirements The standard strictly limits impurities (especially lead, cadmium, and tin) to prevent intergranular corrosion and aging-related dimensional changes. Zinc alloys are widely used in die casting

1. Overview JIS H 5114 is a Japanese Industrial Standard that specifies the requirements for zinc alloy die castings . The standard covers the chemical composition, mechanical properties, manufacturing methods, and inspection criteria for zinc alloy castings produced primarily by the die-casting process. The standard covers the chemical composition