On many consoles, muting a channel kills the Aux sends. On the MCX, it depends . The manual clarifies that Aux 1-4 are "post-mute" by default (if set to post-fader), but Aux 5-6 can be set to "pre-mute" via internal jumpers. This is crucial for monitor mixes. You want the vocalist's reverb to die when you mute the channel? Or keep ringing? The manual has the flowchart.
Because one day, during soundcheck, when the bass player asks for "more me in the wedge" and you hit the PFL button only to hear silence, you will remember this article. You will open the manual to page 34, realize you accidentally engaged the "AFL/PFL split mode," and you will fix it in three seconds. Dynacord Mcx 16.2 Manual
The manual is your co-pilot. Print it out. Put it in a three-ring binder. Tape the power pinout diagram to the top lid. On many consoles, muting a channel kills the Aux sends
For the uninitiated, Dynacord might sound like a relic of the Cold War era. But for live sound engineers, touring bands, and community theater techs, the name carries weight. German engineering. Built-like-a-tank reliability. And a sonic character that sits somewhere between "clinical clean" and "warm glue." This is crucial for monitor mixes
The two mid-band EQs are semi-parametric (frequency sweepable), but the manual notes that at the extreme ends of the sweep, the Q (bandwidth) changes. At 200Hz, it acts as a wide shelf. At 1kHz, it's a tight notch. If you don't know this, you will chase feedback all night. Where to Find the Dynacord MCX 16.2 Manual Today Dynacord was bought by Electro-Voice (EV), which is now owned by Bosch. The official Dynacord website has scrubbed most legacy product support.