Dell Mih61r Mb Front Panel Pinout -

You have a Dell OptiPlex 3010, 7010, or 390. The motherboard is the (often labeled CN-0Y8H8Y or similar). You decided to move this motherboard into a standard ATX case to save money, or perhaps you are trying to diagnose a power button failure.

Welcome to the world of Dell proprietary pinouts. The MH61R does not follow the Intel standard. At all. Dell Mih61r Mb Front Panel Pinout

On the MH61R, look for a header labeled or simply FRONT PANEL . It is located near the bottom right edge of the board, usually just above the SATA ports. You have a Dell OptiPlex 3010, 7010, or 390

Do not trust the color of the wires on a Dell OEM case. Dell changes wire colors between revisions. You must go by pin position, not wire color. The Actual MH61R Pinout (Verified) Here is the pinout looking at the motherboard header with the PCIe slots facing down (bottom edge of the board towards you). Welcome to the world of Dell proprietary pinouts

Press F1 to continue, or flash a modified BIOS (risky) or simply short the two sensor pins together (Pin 8 and Pin 9 in some revisions—research your specific board first). Final Verdict The Dell MH61R is a perfectly capable LGA1155 board (supports Ivy Bridge i5/i7), but it was designed to be e-waste, not upgraded. By understanding the pinout—specifically that the power switch uses Pins 6 & 7 instead of 6 & 8—you can resurrect this board in any case.

If you are reading this, you have likely just experienced a specific flavor of PC building frustration.

You plugged in the standard Intel front panel header connector. You pressed the power button. Nothing happened.